The Kimtech WetTask Dual Performance Wiper System is a smart alternative to potentially unsanitary and sometimes hazardous open buckets of chemicals. They are ideal when you need a wipe with scrubbing power to help remove dried-on substances while you disinfect. The 2-in-1 wipers have a textured, purple side with tough scrubbing power and a soft white side for regular cleaning. When you choose this space-saving system, you get both the Kimtech Prep Wipers and a small closed-top bucket. Then add the chemical solution you prefer – from bleach-based cleaners to sanitizers. It’s simple, hygienic and safe. The enclosed system also helps eliminate exposure to chemical vapors and splashes. The WetTask closed bucket and wet wiping system can cut solvent usage by 20% and reduce VOC emissions for a safer, more cost effective workplace. This system with disposable wipers is the ideal alternative to using an open bucket and eliminates the need for laundering dirty towels and cloth rags. Choose Kimtech WetTask Dual Performance Wiper System and upgrade your cleaning protocol.
Kimtech WetTask Dual Performance Wiper System wipers have durable meltblown construction, with a purple textured side and soft white side
Cuts solvent usage by 20% using the WetTask closed bucket; significantly reduces solvent waste and VOC emissions
Enclosed system also helps eliminate exposure to chemical vapors and splashes
The enclosed bucket system (with disposable wipers) is an ideal alternative to an open bucket and eliminates the need for laundering cloth rags
Instructions for using the Operating Cost Analysis Tool
The Operating Cost Analysis Tool is divided into four sections:
- Section 1: Input Data - raw data used in the calculations
- Section 2: Output Data - calculated data based on Operating Cost formulas
- Section 3: Summary Data - a comparison of the initial and energy costs for each option
- Section 4: Graph Data - a graphical comparison of the initial and energy costs for each option
Enter the appropriate data on the "Input Data" page
If necessary, you may change the default data that automatically appears in the input fields.
All of the WHITE cells must contain input data for the model to work. If fields are left blank or as zeros the data will not be complete. Not a number (NaN) and infinity values indicate an error.
The system airflow rate is set at a default equal to 2000cfm multiplied by # of Filters. The system airflow rate appears when you enter a value in the "# of Filters" field. To change this default, simply enter the actual system airflow in this field and do not change the "# of Filters" field.
To clear all fields and reset the inputs to their defaults, use the "Clear All" button. To reset only the input fields, use the "Default Input" button.
The "Calculations" section displays the calculated data based on the input data. These calculations are use to create the Summary Data. It contains the following sections: 1) Initial Investment Costs 2) Energy Costs.
Energy Calculations are based on the following formula:
Filter pressure drop is calculated as the straight line average between the initial pressure drop and the final pressure drop.
The "Calculations" section cannot be changed.
The "Summary Data" section displays a comparison of the results for each option. This page also recommends which option would realize the most savings.
The "Graph Data" displays a graphical comparison of the cost categories between each filter option.
Print each tab with the button in the lower right. This will print the text in black and white. Use the print button of your web browser to print in color.