- [Instructor] The following video displays the mounting instructions for the Coreless Double Roll Tissue Dispenser. Always wear appropriate protective gear and follow all safety regulations and procedures. See product insert for additional information and warnings. First, determine the height at which the dispenser will be hung. KC recommends the dispenser be hung 36 inches from the floor and 12 inches from the edge of the toilet. Use the enclosed mounting bracket as a template. Use the bracket to determine where the screw holes will be and mark the wall accordingly. Drill the holes and insert the wall anchors, then screw the mounting bracket into the wall. Align the dispenser over the bracket, push firmly to hold in place. While the dispenser is hanging on the wall, mark the wall for the bottom two screw holes. Remove the dispenser and drill the wall for the remaining two wall anchors. Reattach the dispenser and install screws in the final two holes. Be sure to use all screws provided at a minimum. Now, you are ready to load the tissue rolls.